mdsh.com/wiki

MF627 @May 7, 2013 6:32:28 AM

3G USB dongle

Packages we will require:

• eject - for converting the device from a CD-ROM into a modem
• ppp - for pppd and chat applications
• gammu and gammu-smsd - for receiving SMS text messages and running commands
• postfix - for sending email messages

sudo apt-get install -y eject ppp gammu gammu-smsd postfix

Configure postfix as an Internet mail server.

Convert from CD-ROM to modem

The '3' 3G USB dongle I'm connecting to my Raspberry Pi is a ZTE MF627. It has two modes, when it's originally plugged in it appears as a USB CD-ROM, for automatically installing software drivers, and has to be ejected before it turns into a network device. When the device is a CD-ROM it's ID is 19d2:2000, when it's a network device the ID is 19d2:0031.

Here's an easy way to eject the CD-ROM device to turn the dongle into a network device:

Create:
/etc/udev/rules.d/ZTE_MF627.rules
with this contents:
SYSFS{idVendor}=="19d2", SYSFS{idProduct}=="2000", RUN+="/usr/bin/eject %k", OPTIONS+="last_rule"

Now when the dongle is inserted the udev daemon spots the device and sends the eject command. You can check the device ID with lsusb.

We can test the device now with chat:

chat -s -v ATZ OK AT+CSQ OK >/dev/ttyUSB2 </dev/ttyUSB2

in the output you'll see the current signal strength.

Run pppd

First we'll create a pppd config file and it's associated modem chat file.

Create:
/etc/ppp/peers/giffgaff
with this contents:
lock
hide-password
noauth
connect "/usr/sbin/chat -v -f /etc/ppp/peers/giffgaff.chat"
/dev/ttyUSB2
460800
defaultroute
noipdefault
user giffgaff
password password
mtu 1492
ipparam 3g
usepeerdns

Create:
/etc/ppp/peers/giffgaff.chat
with this contents:
ABORT BUSY ABORT 'NO CARRIER'
ABORT VOICE ABORT 'NO DIALTONE'
ABORT 'NO DIAL TONE' ABORT 'NO ANSWER'
ABORT DELAYED
ATZ
OK ATQ0V1E1S0=0&C1&D2+FCLASS=0
OK AT+CGDCONT=1,"ip","giffgaff.com"
OK-AT-OK ATDT*99***1#
CONNECT \d\c

Create:
/etc/ppp/ip-up.d/default_route
with this contents:
#!/bin/sh -e
# Called when a new interface comes up

/sbin/route del default

pon giffgaff

Create:
/usr/local/bin/ZTE_MF627
with this contents:
#!/bin/sh -e

logger "$0" "$ACTION"

case $ACTION in
add )
sleep 2
service gammu-smsd stop
sleep 2
pon giffgaff
sleep 10
service gammu-smsd start
;;
remove )
service gammu-smsd stop
poff giffgaff
;;
esac

KERNEL=="ttyUSB0", SUBSYSTEM=="tty", ATTRS{idVendor}=="19d2", ATTRS{idProduct}=="0031", RUN+="/usr/local/bin/ZTE_MF627", OPTIONS+="last_rule"

---

!!3G USB dongle!! Packages we will require: * eject - for converting the device from a CD-ROM into a modem * ppp - for pppd and chat applications * gammu and gammu-smsd - for receiving SMS text messages and running commands * postfix - for sending email messages {{{sudo apt-get install -y eject ppp gammu gammu-smsd postfix}}} Configure postfix as an Internet mail server. !Convert from CD-ROM to modem! The '3' 3G USB dongle I'm connecting to my Raspberry Pi is a ZTE MF627. It has two modes, when it's originally plugged in it appears as a USB CD-ROM, for automatically installing software drivers, and has to be ejected before it turns into a network device. When the device is a CD-ROM it's ID is 19d2:2000, when it's a network device the ID is 19d2:0031. Here's an easy way to eject the CD-ROM device to turn the dongle into a network device: Create: {{{/etc/udev/rules.d/ZTE_MF627.rules}}} with this contents: {{{SYSFS{idVendor}=="19d2", SYSFS{idProduct}=="2000", RUN+="/usr/bin/eject %k", OPTIONS+="last_rule"}}} Now when the dongle is inserted the udev daemon spots the device and sends the eject command. You can check the device ID with lsusb. We can test the device now with chat: {{{chat -s -v '' ATZ OK AT+CSQ OK >/dev/ttyUSB2 </dev/ttyUSB2}}} in the output you'll see the current signal strength. !Run pppd! First we'll create a pppd config file and it's associated modem chat file. Create: {{{/etc/ppp/peers/giffgaff}}} with this contents: {{{lock hide-password noauth connect "/usr/sbin/chat -v -f /etc/ppp/peers/giffgaff.chat" /dev/ttyUSB2 460800 defaultroute noipdefault user giffgaff password password mtu 1492 ipparam 3g usepeerdns}}} Create: {{{/etc/ppp/peers/giffgaff.chat}}} with this contents: {{{ABORT BUSY ABORT 'NO CARRIER' ABORT VOICE ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT DELAYED '' ATZ OK ATQ0V1E1S0=0&C1&D2+FCLASS=0 OK AT+CGDCONT=1,"ip","giffgaff.com" OK-AT-OK ATDT*99***1# CONNECT \d\c}}} Create: {{{/etc/ppp/ip-up.d/default_route}}} with this contents: {{{#!/bin/sh -e # Called when a new interface comes up /sbin/route del default}}} {{{pon giffgaff}}} Create: {{{/usr/local/bin/ZTE_MF627}}} with this contents: {{{#!/bin/sh -e logger "$0" "$ACTION" case $ACTION in add ) sleep 2 service gammu-smsd stop sleep 2 pon giffgaff sleep 10 service gammu-smsd start ;; remove ) service gammu-smsd stop poff giffgaff ;; esac}}} {{{KERNEL=="ttyUSB0", SUBSYSTEM=="tty", ATTRS{idVendor}=="19d2", ATTRS{idProduct}=="0031", RUN+="/usr/local/bin/ZTE_MF627", OPTIONS+="last_rule"}}}